Elementis BENTONE LT Organoclay, Low‑thickening Rheology Additive, Anti‑settling Anti‑sagging for Low‑viscosity Solvent‑borne Coatings & Inks

Full name & product positioning Full product name: BENTONE LT Organo‑modified Hectorite. Conventional‑activated low‑build‑viscosity organoclay. It delivers anti‑settling and anti‑sagging without excessive viscosity increase, ideal for viscosity‑sensitive solvent‑borne industrial topcoats, decorative paints and inks. Key technical parameters Chemical composition Organo‑modified hectorite Appearance Off‑white to pale beige fine powder Density 1.74 g/cm³ Moisture content ≤3.0 % Loss on ignition 34‑38 % 325‑mesh residue ＜ 130 ppm Physical form Fine powder Standard package 25 kg / bag   CAS No. 1302‑78‑9   Key benefits 1.  Lower viscosity build‑up compared to standard organoclays; achieves anti‑settling & anti‑sagging without over‑thickening finished formulations. 2.  Gradual thixotropic recovery, balancing anti‑sagging and levelling behaviour for better topcoat gloss retention. 3.  Good performance in low‑to‑medium‑polar solvent systems with alkyd, polyurethane and chlorinated rubber resins. 4.  Reduce pigment sedimentation and phase separation during storage. 5.  Well‑suited for spray‑applied topcoats, avoiding excessively high spray viscosity. Main application fields Core applications: Solvent‑borne industrial topcoats, decorative paints, aerosol spray paints, general‑purpose printing inks Suitable for: Industrial primers, anti‑corrosive topcoats, plastisols Not suitable for: Formulations dominated by strong high‑polar ketones‑esters, 100 % water‑based systems, food‑contact articles